DATAKOM: ATS, AMF, AVR, ECM, DKG controllers for diesel, gas, petrol gensets including manual start and auto mains failure generator controls, electronic engine governors, alternator automatic voltage regulators, automatic transfer switches, battery chargers, meters and analyzers, contactors, synchroscopes and automatic synchronizers for multi generating set paralleling and mains synchronization. Buy Datacom online.

DATAKOM DKG-217 Manual start generator control panel with synchroscope

Datakom DATAKOM DKG-217 Manual start generator control panel with synchroscope
Datakom DATAKOM DKG-217 Manual start generator control panel with synchroscope
(0)
$177.00
pcs.

DKG-217 MANUAL AND REMOTE START UNIT WITH SYNCHROSCOPE AND CHECK SYNCH RELAY

The DATAKOM DKG-217 is an innovative generator control unit integrating 4 different functions needed for manually synchronized parallel gensets in a zero power consumption at reststructure. Integrated functions are: a manual start unit with power metering, a remote start unit, a led bargraph synchroscope, a configurable check synch relay.

The DKG-217 is designed to operate both manually and remotely.

In genset running and synchronization checking modes, the DKG-217 controls the automatic starting and stopping of the generating set. Once the generator is running, it monitors internal protections and external fault inputs. If a fault condition occurs, the unit shuts down the engine automatically and indicates the failure source with the corresponding red led lamp.

The DKG-217 provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations and operating sequences. All programs may be modified via front panel pushbuttons, and do not require an external unit.

It is possible to monitor the operation of the system locally or remotely with the WINDOWS based PC utility program.

FEATURES:
Manual starting and stopping
Zero power consumption at rest
Remote Start operation available
LED bargraph synchroscope
Programmable ΔV, Δf, Δθ for check synch relay
Engine control
Generator protection
Built in alarms and warnings
3 phase genset voltage inputs
1 phase genset CT input
1 phase busbar voltage input
Engine oil pressure measurement
Engine coolant temperature measurement
Genset active power measurement (single phase)
Genset power factor measurement (single phase)
Periodic maintenance request indicator
Engine hours run counter
Event logging
Statistical counters
Front panel configurable
100+ adjustable parameters
Logic level serial port
Optional RS-232 adapter
Free MS-Windows Remote monitoring SW:
    -local, LAN,  IP and modem connection
    -monitoring, download of parameters
LED displays
Configurable analogue inputs: 2
Configurable digital inputs: 5
Configurable relay outputs: 2
Total relay outputs: 5
Survives cranking dropouts
Sealed front panel
Plug-in connection system for easy replacement
Small dimensions (130x100x39mm)

FUNCTIONALITIES:
  - a manual start unit with power metering
  - a remote start unit
  - a led bargraph synchroscope
  - a configurable check synch relay

TECHNICAL SPECIFICATIONS:
Alternator voltage: 15 to 300 V-AC (Ph-N)
Alternator frequency: 0-100 Hz.
Busbar voltage: 0 to 300 V-AC (Ph-N)
Busbar frequency: 50 / 60 Hz
Current input: from current transformer, .../5A. Max load 0.7VA
Digital inputs: input voltage 0 - 30 V-DC. Internally connected to battery positive via 4700 ohm resistor.
Analog inputs: Resistor input 0 to 5000 ohms connected to the battery negative. Sources 10 mA when closed
to battery negative.
Measurement category: CAT II
Air category: Pollution degree II
DC Supply range: 9.0 V-DC to 30.0 V-DC
Cranking dropouts: survives 0 V for 100ms
Maximum current consumption: 350 mA-DC (Relay outputs open)
Check synch relay output: 16 A / 250 V.
DC relay outputs: 10A / 28 V.
Max. current for each terminal: 10A-RMS.
Charge alternator excitation current: 54 mA-DC @ 12 V-DC.
Communication port: Logic levels. 2400 bauds, no parity, 1 stop bit.
Operating temperature range: -20°C to +70°C (-4°F to +158°F)
Storage temperature range: -40°C to +80°C (-40°F to +176°F)
Maximum humidity: 95%, non-condensing
IP protection: IP65 from front panel, IP30 from the rear
Dimensions: 130 x 100 x 39mm (WxHxD)
Panel Cut-out dimensions: 116 x 86mm minimum.
Mounting: Front panel mounted with rear retaining steel spring
Weight: 270 g (approx.)
Case material: High temperature, self extinguishing ABS (UL94-V0, 110°C)


WE DO NOT SHIP THIS PRODUCT TO USA AND CANADA



  • Previous Generation Products
  • 4PRO Contactors and Load Transfer Switches
  • 4PRO Wireless remote control sets
  • Software and Access Licenses
DATAKOM: ATS, AMF, AVR, ECM, DKG controllers for diesel, gas, petrol gensets including manual start and auto mains failure generator controls, electronic engine governors, alternator automatic voltage regulators, automatic transfer switches, battery chargers, meters and analyzers, contactors, synchroscopes and automatic synchronizers for multi generating set paralleling and mains synchronization. Buy Datacom online.