DATAKOM: ATS, AMF, AVR, ECM, DKG controllers for diesel, gas, petrol gensets including manual start and auto mains failure generator controls, electronic engine governors, alternator automatic voltage regulators, automatic transfer switches, battery chargers, meters and analyzers, contactors, synchroscopes and automatic synchronizers for multi generating set paralleling and mains synchronization. Buy Datacom online.

DATAKOM DKG-151 Manual start generator control panel

Datakom DATAKOM DKG-151 Manual start generator control panel
Datakom DATAKOM DKG-151 Manual start generator control panel
(0)
$80.00
pcs.

The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.

When the engine is running, the unit monitors fault conditions and shuts-down the engine automatically in the occurrence of an alarm.

In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.

When the engine is running, the unit monitors fault conditions and shuts-down the engine automatically in the occurrence of an alarm. The alarms are identified by a group of LEDs displaying only the first occurring one.

The occurrence of below fault conditions will cause the engine to be stopped immediately: overspeed, underspeed, high engine temperature, low of pressure, Auxiliary shutdown.

The limits for the correct generator frequency are 25 to 57 Hz for 50Hz operation and, 25 to 68 Hz for 60Hz operation. The unit uses high current two part connectors for easy replacement.

The DKG-151 is also able to control ‘Energize to Stop’ type of engines. The engine type selection is made by a jumper switch.

FEATURES:
• Microprocessor controlled
• Manual fuel control and start
• High current relay outputs
• Charge alternator excitation circuit
• High engine temperature protection
• Low oil pressure protection
• Overspeed-underspeed protection
• Spare alarm input
• User selectable 50/60 Hz operation
• User selectable energize to start/stop operation
• Standard panel dimensions (72x72mm)
• Low cost

TECHNICAL SPECIFICATIONS:
Alternator Voltage: 15 to 300 V-AC
Alternator Frequency: 50 or 60 Hz nominal.
Overspeed: nominal frequency + 14%
                   (+24% overshoot)
Underspeed: 25Hz
DC Supply Range: 8 to 33 V-DC.
Current consumption: 80mA max. (Relay outputs open).
Charge fail threshold: 6 V-DC.
Charge excitation current: via 82 ohms resistor connected to the FUEL output.
Stop Timeout: 30 sec.
Operating temp.: -20°C (-4°F) to 70°C (158°F).
Storage temp.: -30°C (-22°F) to 80°C (176°F).
Maximum humidity: 95% non-condensing.
Dimensions: 72x72x38mm (WxHxD)
Panel cutout dimensions: 68x68 mm
Weight: 140g (approx.)
Installation: Front panel mounted. Retaining steel spring provided.

WE DO NOT SHIP THIS PRODUCT TO USA AND CANADA



DATAKOM: ATS, AMF, AVR, ECM, DKG controllers for diesel, gas, petrol gensets including manual start and auto mains failure generator controls, electronic engine governors, alternator automatic voltage regulators, automatic transfer switches, battery chargers, meters and analyzers, contactors, synchroscopes and automatic synchronizers for multi generating set paralleling and mains synchronization. Buy Datacom online.